Links and References ====================== .. include:: includes.rst Links ###### * `Matlab GUI. `_ * `Visit the YAML website for more informations. `_ * `Visit the YAML code for Matlab. `_ Other interesting Matlab toolboxes about indentation ############################################################## * `STABiX `_ / `STABiX Documentation `_ * `PopIn `_ / `PopIn Documentation `_ * `TriDiMap `_ / `TriDiMap Documentation `_ Links about (nano)indentation ############################### * `SF2M - Groupe Indentation. `_ * `Matlab Li's code to determine elastic modulus and hardness of an ultra-thin film on a substrate using nanoindentation. `_ * `ISO 14577 - 1 , "Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 1: Test method", (2002). `_ * `ISO 14577 - 2 , "Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 2: Verification and calibration of testing machines", (2002). `_ * `ISO 14577 - 3 , "Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks", (2002). `_ * `ISO 14577 - 4 , "Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatings", (2007). `_ References ########### * `Mercier D. et al., "Young's modulus measurement of a thin film from experimental nanoindentation performed on multilayer systems" (2010). `_ * `Mercier D., "Behaviour laws of materials used in electrical contacts for « flip chip » technologies.", PhD thesis (2013) `_ * `Mercier D., "Behaviour laws of materials used in electrical contacts for « flip chip » technologies." PhD defense (2013). `_ * `Mercier D. et al., "Investigation of the fracture of very thin amorphous alumina film during spherical nanoindentation" (2017). `_ (Nano)Indentation models (conical indenters) --------------------------------------------- * `Love A.E.H., "Boussinesq's problem for a rigid cone." (1939). `_ * Galin L.A., "Spatial contact problems of the theory of elasticity for punches of circular shape in planar projection.", J. Appl. Math. Mech. (PMM) (1946), 10, pp. 425-448. * Bulychev S.I. et al., "Determining Young’s modulus from the indentor penetration diagram.", Zavod. Lab., 1973, 39, pp. 1137-1142. * Shorshorov M.K. et al., Sov. Phys. Dokl., 1982, 26. * `Loubet J.L. et al., "Vickers Indentation Curves of Magnesium Oxide (MgO)." (1984). `_ * `Doerner M.F. and Nix W.D., "A method for interpreting the data from depth-sensing indentation instruments" (1986). `_ * `Loubet J.L. et al., "Vickers indentation curves of elastoplastic materials" (1986). `_ * `Joslin D.L. and Oliver W.C., "A new method for analyzing data from continuous depth-sensing microindentation tests" (1990). `_ * `Oliver W.C. and Pharr G.M., "An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments" (1992). `_ * `Pharr G.M. et al., "On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation" (1992). `_ * `Loubet J.L. et al., "Nanoindentation with a surface force apparatus." (1993). `_ * `Lucas B.N. et al., "Time Dependent Deformation During Indentation Testing." (1996). `_ * `Hainsworth S.V. et al., "Analysis of nanoindentation load-displacement loading curves" (1996). `_ * `Bec S. et al., "Improvements in the indentation method with a surface force apparatus" (1996). `_ * `Menčík J. et al., "Determination of elastic modulus of thin layers using nanoindentation" (1997). `_ * `Bolshakov A. and Pharr G. M., "Influences of pile-up on the measurement of mechanical properties by load and depth sensing indentation techniques." (1998). `_ * `Cheng Y.T. and Cheng C.M. ,"Effects of 'sinking in' and 'piling up' on estimating the contact area under load in indentation." (1998). `_ * `Cheng Y.T. and Cheng C.M. ,"Relationships between hardness, elastic modulus, and the work of indentation." (1998). `_ * `Hochstetter G. et al., "Strain-rate effects on hardness of glassy polymers in the nanoscale range. Comparison between quasi-static and continuous stiffness measurements" (1999). `_ * `Malzbender J. and de With G., "Indentation load–displacement curve, plastic deformation, and energy." (2002). `_ * `Li X. and Bhushan B., "A review of nanoindentation continuous stiffness measurement technique and its applications." (2002). `_ * `Oliver W.C. and Pharr G.M., "Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology" (2004). `_ * `Cheng Y.T. and Cheng C.M., "Scaling, dimensional analysis, and indentation measurements." (2004). `_ * `Fischer-Cripps A.C., "Critical review of analysis and interpretation of nanoindentation test data" (2006). `_ * `Guillonneau G. et al.,"Extraction of mechanical properties with second harmonic detection for dynamic nanoindentation testing." (2012). `_ * `Guillonneau G. et al., "Determination of mechanical properties by nanoindentation independently of indentation depth measurement" (2012). `_ * `Yetna N'jock M. et al., "A criterion to identify sinking-in and piling-up in indentation of materials." (2015). `_ Correction factors and Correction of experimental data -------------------------------------------------------- * `King R.B., "Elastic analysis of some punch problems for a layered medium" (1987). `_ * `Menčík J., "Determination of elastic modulus of thin layers using nanoindentation" (1997). `_ * `Hay J.C. et al., "A critical examination of the fundamental relations used in the analysis of nanoindentation data" (1999). `_ * `Troyon M. and Lafaye S., "About the importance of introducing a correction factor in the Sneddon relationship for nanoindentation measurements" (2002). `_ * `Strader J.H. et al., "An experimental evaluation of the constant b relating the contact stiffness to the contact area in nanoindentation." (2006). `_ * `Fischer-Cripps A.C., "Critical review of analysis and interpretation of nanoindentation test data" (2006). `_ * `Kashani M.S. and Madhavan V., "The Effect of Surface Tilt on Nanoindentation Results" (2007). `_ * `Jakes J.E. et al., "Experimental method to account for structural compliance in nanoindentation measurements" (2008). `_ * `Pharr G.M. et al., "Critical issues in making small-depth mechanical property measurements by nanoindentation with continuous stiffness measurement" (2009). `_ * `Kaufman J. D. and Klapperich C. M., "Surface detection errors cause overestimation of the modulus in nanoindentation on soft materials" (2009). `_ * `Li H. et al., "New methods of analyzing indentation experiments on very thin films" (2010). `_ * `Piccarolo S. et al., "Improving surface detection on nanoindentation of compliant materials" (2010). `_ * `Jakes J.E. and Stauffer D., "Contact area correction for surface tilt in pyramidal nanoindentation" (2021). `_ Bilayer models to extract Young's modulus of a thin film on a substrate (with conical indenters) -------------------------------------------------------------------------------------------------- * Bückle H., "VDI Berichte" (1961). * `Doerner M.F. and Nix W.D.,"A method for interpreting the data from depth-sensing indentation instruments" (1986). `_ * `Yu H.Y. et al., "The effect of substrate on the elastic properties of films determined by the indentation test - axisymmetric Boussinesq problem" (1990). `_ * `Pharr G.M. and Oliver W.C., "Measurement of Thin Film Mechanical Properties Using Nanoindentation" (1992). `_ * `Gao H. et al., "Elastic contact versus indentation modeling of multi-layered materials" (1992). `_ * `Menčík J. et al., "Determination of elastic modulus of thin layers using nanoindentation" (1997). `_ * `Chen X. and Vlassak J.J., "Numerical study on the measurement of thin film mechanical properties by means of nanoindentation" (2001). `_ * `Rar A. et al., "Assessment of new relation for the elastic compliance of a film–substrate system." (2002). `_ * `Saha R. and Nix W.D., "Effects of the substrate on the determination of thin film mechanical properties by nanoindentation" (2002). `_ * `Chen S. et al., "Nanoindentation of thin-film-substrate system: Determination of film hardness and Young's modulus" (2004). `_ * `Jung Y.-G. et al. "Evaluation of elastic modulus and hardness of thin films by nanoindentation" (2004). `_ * `Perriot A. and Barthel E., "Elastic contact to a coated half-space: Effective elastic modulus and real penetration" (2004). `_ * `Bec S. et al., "A simple guide to determine elastic properties of films on substrate from nanoindentation experiments" (2006). `_ * `Xu H. and Pharr G.M., "An improved relation for the effective elastic compliance of a film/substrate system during indentation by a flat cylindrical punch." (2006). `_ * `Korsunsky A.M. and Constantinescu A., "The influence of indenter bluntness on the apparent contact stiffness of thin coatings" (2009). `_ * `Li H. and Vlassak J.J., "Determining the elastic modulus and hardness of an ultra-thin film on a substrate using nanoindentation" (2009). `_ * `Sakai M., "Substrate-affected indentation contact parameters of elastoplastic coating/substrate composites" (2009). `_ * `Hay J. and Crawford B., "Measuring substrate-independent modulus of thin films" (2011). `_ * `Bull S.J., "Mechanical response of atomic layer deposition alumina coatings on stiff and compliant substrates" (2011). `_ * `Bull S.J., "A simple method for the assessment of the contact modulus for coated systems." (2014). `_ * `Li Y. et al., "Models for nanoindentation of compliant films on stiff substrates" (2015). `_ Multilayer models to extract Young's moduli of thin films on a multilayer sample (with conical indenters) ---------------------------------------------------------------------------------------------------------- * `Pailler-Mattei C. et al., "In vivo measurements of the elastic mechanical properties of human skin by indentation tests" (2008). `_ * `Mercier D. et al., "Young's modulus measurement of a thin film from experimental nanoindentation performed on multilayer systems" (2010). `_ * `Mercier D., "Lois de comportement des matériaux utilisés dans les contacts électriques pour application " flip chip "" (2013). `_ * `Constantinescu A. et al., "Symbolic and numerical solution of the axisymmetric indentation problem for a multilayered elastic coating" (2013). `_ * `Puchi-Cabrera. E.S. et al., "A description of the composite elastic modulus of multilayer coated systems" (2015). `_ Bilayer models to extract hardness of a thin film on a substrate (with conical indenters) -------------------------------------------------------------------------------------------------- * Bückle H., "VDI Berichte" (1961). * `Kao P.-W. and Byrne J. G., "Ion Implantation Effects on Fatigue and Surface Hardness" (1981). `_ * `Jönsson B. and Hogmark S., "Hardness measurements of thin films" (1984). `_ * `Doerner M.F. et al., "Plastic properties of thin films on substrates as measured by submicron indentation hardness and substrate curvature techniques" (1986). `_ * `Burnett P.J. and Rickerby D.S., "The mechanical properties of wear-resistant coatings: I: Modelling of hardness behaviour." (1987). `_ * `Burnett P.J. and Rickerby D.S., "The mechanical properties of wear-resistant coatings: II: Experimental studies and interpretation of hardness." (1987). `_ * `Bhattacharya A.K. and Nix W.D., "Analysis of elastic and plastic deformation associated with indentation testing of thin films on substrates" (1988). `_ * `Page T.F. et al., "Nanoindentation Characterisation of Coated Systems: P:S2 - A New Approach Using the Continuous Stiffness Technique" (1998). `_ * `Fernandes J.V. et al., "A model for coated surface hardness" (2000). `_ * `Han S.M. et al., "Combinatorial studies of mechanical properties of Ti–Al thin films using nanoindentation" (2005). `_ * `Han S.M. et al., "Determining hardness of thin films in elastically mismatched film-on-substrate systems using nanoindentation" (2006). `_ * `Veprek-Heijman M.G.J. and Veprek S., "The deformation of the substrate during indentation into superhard coatings: Bückle's rule revised" (2016). `_ Multilayer models to extract hardness of thin films on a multilayer sample (with conical indenters) ---------------------------------------------------------------------------------------------------------- * `Engel P.A. et al., "Interpretation of superficial hardness for multilayer platings" (1992). `_ * `Rahmoun K. et al., "A multilayer model for describing hardness variations of aged porous silicon low-dielectric-constant thin films" (2009). `_ * `Arrazat B. et al., "Nano indentation de couches dures ultra minces de ruthénium sur or" (2010). `_ Finite Element Modelling of conical indentation of thin film(s) on a substrate --------------------------------------------------------------------------------- * `Charleux L., "Abapy Documentation" `_ * ABAQUS documentation * `Bhattacharya A.K. and Nix W.D., "Analysis of elastic and plastic deformation associated with indentation testing of thin films on substrates" (1988). `_ * `Bhattacharya A.K. and Nix W.D., "Finite element analysis of cone indentation." (1991). `_ * `Madsen D.T. et al. "Finite Element Simulation of Indentation Behavior of thin Films." (1991). `_ * `Sun Y. et al., "Finite element analysis of the critical ratio of coating thickness to indentation depth for coating property measurements by nanoindentation." (1995). `_ * `Bolshakov A. and Pharr G.M., "Influences of pile-up on the measurement of mechanical properties by load and depth sensing indentation techniques." (1998) `_ * `Lichinchi M. et al., "Simulation of Berkovich nanoindentation experiments on thin films using finite element method." (1998). `_ * `Chen X. and Vlassak J.J., "A Finite Element Study on the Nanoindentation of Thin Films." (2000). `_ * `Chen X. and Vlassak J.J., "Numerical study on the measurement of thin film mechanical properties by means of nanoindentation." (2001). `_ * `Bouzakis K.-D. et al., "Thin hard coatings stress–strain curve determination through a FEM supported evaluation of nanoindentation test results.", (2001). `_ * `Hubert N. et al. "Identification of elastic-plastic material parameters from pyramidal indentation of thin films." (2002). `_ * `Shan Z. and Sitaraman S.K., "Elastic–plastic characterization of thin films using nanoindentation technique." (2003). `_ * `He J.L. and Veprek S., "Finite element modeling of indentation into superhard coatings." (2003). `_ * `Xu Z.-H. and Rowcliffe D., "Finite element analysis of substrate effects on indentation behaviour of thin films." (2004). `_ * `Panich N. and Sun Y. "Effect of penetration depth on indentation response of soft coatings on hard substrates: a finite element analysis" (2004) `_ * `Cai X. and Bangert H., "Hardness measurements of thin films-determining the critical ratio of depth to thickness using FEM." (2005). `_ * `Bressan J.D. et al., "Modeling of nanoindentation of bulk and thin film by finite element method." (2005). `_ * `Pelletier H. et al., "Characterization of mechanical properties of thin films using nanoindentation test." (2006) `_ * Charleux L., "Micromécanique de l'essai d'indentation : expériences et simulations.", PhD thesis, Institut National Polytechnique de Grenoble (2006). * `Xu H., "A Finite Element Study of the Contact Stiffness of Homogenous Materials and Thin Films." PhD thesis - University of Tennessee - Knoxville (2007) `_ * `Antunes J.M. et al., "On the determination of the Young's modulus of thin films using indentation tests" (2007). `_ * `Chen S.H. et al., "Small scale, grain size and substrate effects in nano-indentation experiment of film–substrate systems." (2007). `_ * `Huang X. and Pelegri A.A., "Finite element analysis on nanoindentation with friction contact at the film/substrate interface." (2007). `_ * Kopernik M. and Pietrzyk M., "2d numerical simulation of elasto-plastic deformation of thin hard coating systems in deep nanoindentation test with sharp indenter." (2007). * `Pelegri A.A. and Huang X., "Nanoindentation on soft film/hard substrate and hard film/soft substrate material systems with finite element analysis." (2008). `_ * `Wittler O. et al., "Mechanical characterisation of thin metal layers by modelling of the nanoindentation experiment." (2008). `_ * `Sakharova N.A. et al., "Comparison between Berkovich, Vickers and conical indentation tests: A three-dimensional numerical simulation study." (2009). `_ * `Rao C.S. and Reddy C.E., "Finite element modeling of nanoindentation to extract load-displacement characteristics of bulk materials and thin films." (2009). `_ * `Gonzalez M. et al., "Modeling the substrate effects on nanoindentation mechanical property measurement." (2009). `_ * `Chen C., "2-D Finite Element Modeling for Nanoindentation and Fracture Stress Analysis.", PhD thesis - University of South Florida (2009). `_ * `Moore S.W. et al., "Nanoindentation in elastoplastic materials: insights from numerical simulations." (2010). `_ * Guo W., "On the influence of indenter tip geometry on the identification of material parameters in indentation testing.", PhD thesis, University of Liège (2010). * `Wang J.S. et al., "Identification of elastic parameters of transversely isotropic thin films by combining nanoindentation and FEM analysis." (2010). `_ * `Jiang L.M. et al., "Elastic-plastic properties of thin film on elastic-plastic substrates characterized by nanoindentation test." (2010). `_ * `Miller D.C. et al., "Thermo-mechanical properties of alumina films created using the atomic layer deposition technique." (2010). `_ * `Dowhan L. et al., "Investigation of thin films by nanoindentation with doe and numerical methods." (2011). `_ * `Isselé H. et al., "Determination of the Young's modulus of a TiN Thin Film by nanoindentation: analytical models and numerical FEM simulation." (2012). `_ * `Phiciato's blog (2013) `_ * `Karimpour M. et al., "An inverse method for extracting the mechanical properties of the constituent materials of a multilayer from nanoindentation data." (2013). `_ * Fourcade T., "Études des propriétés mécaniques de matériaux métalliques en couches minces", PhD thesis - Université de Toulouse (2013). * `Moćko W. et al., "Simulation of nanoindentation experiments of single-layer and double-layer thin films using finite element method." (2014). `_ * `Kibech S. et al., "Nanoindentation" (2014). `_ * `Kopernik M. and Milenin A., "Numerical modeling of substrate effect on determination of elastic and plastic properties of TiN nanocoating in nanoindentation test." (2014). `_ * `Li Y. et al., "Models for nanoindentation of compliant films on stiff substrates" (2015). `_ * `Moreau S. et al., "Application of Design of Computer Experiments (DoCE) method for the extraction of the elasto-plastic behavior law of ECD copper through nano-indentation tests" (2015). `_ * `Gupta A. K. et al., "Evaluation of elasto-plastic properties of ITO film using combined nanoindentation and finite element approach" (2015). `_ * `Veprek-Heijman M.G.J. and Veprek S., "The deformation of the substrate during indentation into superhard coatings: Bückle's rule revised" (2016). `_ * `Du Y. et al., "A novel tri-layer nanoindentation method to measure the mechanical properties of a porous brittle ultra-low-k dielectric thin film" (2017). `_ * `Lofaj F. and Németh D., "The effects of tip sharpness and coating thickness on nanoindentation measurements in hard coatings on softer substrates by FEM" (2017). `_ * `Chakroun N. et al., "A new inverse analysis method for identifying the elastic properties of thin films considering thickness and substrate effects simultaneously" (2017). `_ * `Chakroun N. et al., "Measuring elastic properties of the constituent multilayer coatings for different modulation periods" (2018). `_ * `Pöhl F., "Determination of unique plastic properties from sharp indentation" (2019). `_ * `Lodh A., "Orientation-dependent solid solution strengthening in zirconium: a nanoindentation study" (2019). `_ * `Xiao H., "Theoretical model for determining elastic modulus of ceramic materials by nanoindentation" (2021). `_ * `Sivaram S. et al., "Qualitative Study on Pile-up Effect on Hardness Test by Nano-Indentation" (2021). `_ * `Vajire S.L. et al., "Novel machine learning-based prediction approach for nanoindentation load-deformation in a thin film: Applications to electronic industries" (2022). `_ Softwares ########### * `IndentAnalyser by ASMEC `_ * `Elastica by ASMEC `_ * `Softwares from SIOMEC `_ * `Piuma dataviewer from Optics 11 `_ * `Punias `_ * `Gwyddion `_ * `Softwares from Nanovea `_ * `Virtual nanoindenter `_ * `Nanoindentation from Kibech S. et al. `_ Reviews / Overviews of nanoindentation technique ################################################################## * `Li X. and Bhushan B., "A review of nanoindentation continuous stiffness measurement technique and its applications." (2002). `_ * `VanLandingham M.R., "Review of Instrumented Indentation" (2003). `_ * `Fischer-Cripps A.C., "Nanoindentation" Springer 3rd Ed. (2011). `_ * `Oliver W.C. and Pharr G.M., "Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology" (2004). `_ * `Fischer-Cripps A.C., "Critical review of analysis and interpretation of nanoindentation test data" (2006). `_ * `Lucca D.A. et al., "Nanoindentation: Measuring methods and applications" (2012). `_ * `Němeček J., "Nanoindentation in Material Science" (2012). `_ * `Michailidis N. et al., "Nanoindentation" (2014). `_ Reviews / Overviews of nanoindentation technique applied to coatings ################################################################################ * `Pharr G.M. and Oliver W.C., "Measurement of Thin Film Mechanical Properties Using Nanoindentation" (1992). `_ * `Mencík J. et al., "Determination of elastic modulus of thin layers using nanoindentation" (1997). `_ * `Nix W.D., "Elastic and plastic properties of thin films on substrates: nanoindentation techniques" (1997). `_ * `Van Vliet K.J. and Gouldstone A., "Mechanical Properties of Thin Films Quantified Via Instrumented Indentation" (2001). `_ * `Fischer-Cripps A.C., "Nanoindentation" Springer 3rd Ed. (2011). `_ * `Šimůnková Š., "Mechanical properties of thin film–substrate systems" (2003). `_ * `Bull S.J., "Nanoindentation of coatings" (2005). `_ Books ########### * Johnson K.L., "Contact Mechanics" (1987), ISBN - 9780521347969. * `Bhushan B., "Micro/Nanotribology and Its Applications" (1997). `_ * `Fischer-Cripps A.C., "Introduction to Contact Mechanics" Springer 1st Ed. (2000). `_ * `Fischer-Cripps A.C., "Nanoindentation" Springer 1st Ed. (2002). `_ * `Fischer-Cripps A.C., "Nanoindentation" Springer 2nd Ed. (2004). `_ * `Fischer-Cripps A.C., "Introduction to Contact Mechanics" Springer 2nd Ed. (2007). `_ * `Feng Z.-Q. et al., "Theory of nanoindentation" Handbook of Nanophysics - Chapter 26 (2010). `_ * `Fischer-Cripps A.C., "Nanoindentation" Springer 3rd Ed. (2011). `_ * `Tiwari A., "Nanomechanical Analysis of High Performance Materials" Springer Vol. 203 (2014). `_ * `Tiwari A. and Natarajan S., "Applied Nanoindentation in Advanced Materials" Wiley (2017). `_